Cold forming machines are widely used in the production of parts such as galvanized sheet, strip steel, stainless steel sheet and other plates. The focus of the demand for cold roll forming machines is mainly concentrated on high-end products such as medium and large and heavy. The cold roll forming machine also has the advantages of operation, maintenance, maintenance, mechanical Adjusting, and easy mold replacement.

The Adjusting method of the cold roll forming machine is:
1. The Adjusting method for the deviation of the pressure plate of the cold roll forming machine, such as running the plate to the right, cushioning the left corner, or falling to the right and leveling the bottom.
2. Find the center of the first row and the last row of the cold roll forming machine, then tighten the lock nuts on both sides, pull a straight line before and after the center of the middle wheel, and adjust the gap between the upper and lower shafts. , You can adjust the machine along a straight line.

First, the four corners of the front and back lines of the cold-roll forming machine equipment have the same height from the upper end of the big frame to the bottom shaft, and then from the first row to the last row, find a line to straighten, check whether the lower shaft On a straight line, adjust the left and right sides of the lower shaft to be horizontal.