Home > Products > Steel Structure Enclosure Industry > TF Decking Floor Roll Forming Line
TF Decking Floor Roll Forming Line

TF Decking Floor Roll Forming Line

1. Equipment overview:
This kind of cold roll forming machine is widely used for making various metal wall panels and roof panels for steel constructions, steel structure projects and containment systems etc.
This production line consists of feeding unit, uncoiler, feeding guide, roll forming machine, cutter, automatic stacker, hydraulic system and electric control system.
The line speed of this panel forming machine is 40m/min.

2. Main technical parameters list:

NO. Type Unit Data Note
1 Material 350MPa Colorful/galvanized steel
2 Coil thickness mm 0.8
3 Coil width mm 1250
4 Length tolerance mm ±2
5 Linear tolerance mm EN10162
6 Twist tolerance mm
7 Flatness tolerance mm

tf decking floor roll forming line4tf decking floor roll forming line53. Line main technical parameters list

No. Type Unit parameters Note
1 Line speed m/min 40  
2 Line size m About 40*7.5*3 L*W*H
3 Line color   Sea blue Can change if you need

4. The process from raw material to the final sheets
Loading → uncoiling→ swing bridge→ guiding device→ electric pre-shear→ roll forming →servo tracking cutting→ speed up belt → stacking →final sheets

tf decking floor roll forming line6

5. Components

No. Name unit Quantity note
1 uncoiler set 1 10T hydraulic uncoiler,

1250mm width, with loading car

2 Swing bridge set 1  


3 Guiding device set 1
4 Electric pre-cutter set 1
5 Roll forming machine set 1
6 Servo tracking cutter set 1
7 Stacker Set 1 With speed-up belt
8 Hydraulic system For uncoiler set 2 Special hydraulic system
For cutter
9 Electric control system set 1 Control the whole line
10 Safety guard set 1 Safety fence

tf decking floor roll forming line7

6. Description of roll former
It adopts absolute stand structure. The machine base is welded and has stress relief treatment.
The bearings of fixed side is conical bearings, the movable side is cylindrical roller bearings.
Screw rod adjusts the space between up and down shafts, and has locknuts to tight.
The roll forming craft is made by the special Germany cold roll forming program COPRA; the craft is also made the FEA analysis and check.


Please Choose:
Name * Email *
Tel Country Message *