TF Door panel automatic production line is combined the roll forming and punching together. With the hydraulic press block, all the holes on the door panel can be made automatically on this line, such as hinge holes, lock holes, mounting holes, peepholes, etc. With the PLC control, the punching device can make the different combinations of these holes automatically, so the customer can change the type of door panel easily.
Uncoil— leveling feeding device—gap\emboss\bayonet punching unit—roll forming machine—cut flanger device flip racker leveling
TF45-1000 Door panel automatic production line
TF45-1000 DOOR PANEL automatic production line is used to pre-punch steel plate and roll it into door panel profiles. The line consists of a de-coiler. Leveling feeding. Punching pressure, the transmission system, and roll forming machine. It could adjust the width of the feeding material. Replace the punching tooling. Adjust the width of the products. The production line has many characteristics. Such as reasonable structure. Easy to operate. Safe and reliable. Brief production process. Wide usage etc.
The roll forming craft is made by the special Germany cold roll forming program COPRA; the craft is also made the FEA analysis and check. The structure of the rollers is combined, so the line speed difference and resisting force of roll forming are small. The sheet is easy to feed. All these assure the accuracy and stability of the roll forming.
|1||Suitable material||Type||Galvanized coil|
|Coil internal diameter||mm||508/610|
|4||Roller material||Cr12, HRC58-62|
|5||Roller driven type||gear|
|6||Operating system||Manual/ automatic|
|7||Total motor power||Kw||About 55|
|8||Electric control system||PLC automatic control system|